SNBASE 7500 Operating Table
Table length and width: 1850mm×580mm
The highest and lowest table top: 650-900mm
The maximum angle of front and rear tilt of the table: forward tilt ≥ 15° and backward tilt ≥ 25°
Backplane adjustment range: 0-75°
Auxiliary table: 600×530mm
The bed surface is raised and lowered, and the adjustment angle of the back board and hip board only needs to be adjusted by pressing the controller or foot controller by hand.
The built-in auxiliary table is extremely convenient to draw out or retract, and has a lifting function.
Sturdy steel frame structure, and high-quality 304 stainless steel cover, the base brake device is operated by foot pedal, and the bed is firmly fixed.
SNMOT7500A Operating Table
Minimum countertop: 735mm
The highest table top: 985mm
Table length: ≥2000±20mm
Table width: ≥600mm±20mm
Back panel fold: ≥75°±2°, bottom fold ≥12°±2° (electric)
Upset of the hip plate: ≥32°±2° (electric)
Front and rear tilt: ≥15°±2° (electric)
The bed can meet the needs of a variety of gynecological operations such as gynecological examination, gynecological diagnosis, childbirth, cesarean section and so on.
The scientific recessed base design makes it easier for the doctor to approach the mother, relieves the doctor's low back fatigue, reserves the foot space for the medical staff, and ensures the balance and stability of the operating bed during various movements.
The humanized leg plate design can be used for abduction and rotation: ≥90° for auxiliary surgery; it can be freely disassembled and used as a high-end gynecological examination bed.
SNMOT 7500B Operating Table
Minimum table height: ≥620±20mm
The maximum height of the table: ≥780±20mm
Table length: ≥1980±20mm
Table width: ≥720mm±20mm
Operating table load: ≥200kg
Back panel fold: ≥55°±2°, bottom fold: ≥18°±2° (electric)
Upset of the hip plate: ≥30°±2° (electric)
The obstetric bed can meet the needs of a variety of gynecological operations such as gynecological examination, gynecological diagnosis, childbirth, cesarean section and so on. As a high-end gynecological examination bed, it is easy to disassemble and assemble, and one bed can be used for multiple purposes to meet the diverse needs of the department.
It is driven by a precision medical special micro-motor and has an electric gear meshing mechanical structure. Both the hip plate and the base are equipped with a sewage diversion groove design, which is convenient for the operator to stand and drain the dirt, prevent the amniotic fluid from splashing out, and facilitate cleaning.
The product can be equipped with a dual-control system. The handheld controller and the foot controller make the operation of the medical staff more convenient. The delivery bed is equipped with an electric brake system, which is convenient for locking and moving the operating table.
SNMOT5500 Operating Table
Minimum table height: 740mm
The maximum height of the table: 1000mm
Table length: ≥1850
Table width: ≥600mm
Operating table load: ≥180kg
The back panel is folded ≥75°, and the bottom fold is ≥10°
The back plate is tilted forward ≥10° and tilted backward ≥25°
The obstetric bed can meet the needs of various gynecological operations such as gynecological examination, gynecological diagnosis, childbirth, and cesarean section.
All stainless steel bed and base,Equipped with a retractable stainless steel dirt basin, equipped with a high-performance rechargeable battery, and imported linear motor.
It supports the quick installation and removal of the side handrail, the side rail of the operating table has a safe anti-slip design, and has a foot-pedal diagonal brake system, which is convenient for doctors to lock the operating table.
SNBASE7300 Operating Table
Bed height: 580mm-980mm
Bed width: 540mm
Bed surface arc length: 1300mm
Bed surface rotation angle: 50°
Lifting speed: 50 mm/sec
Power supply: 220V 50Hz
The drive of the examination bed adopts electro-hydraulic transmission mode, which is controlled by the controller by hand, which is convenient and flexible to use. The hydraulic system adopts imported oil pump and solenoid valve. The overall performance is more reliable and durable.
SNMOT5300 ENT operation table
Minimum table height: 600mm
The maximum height of the table: 1000mm
Table length: ≥2050
Table width: ≥600mm
Operating table load: ≥180kg
Back panel fold ≥ 70°, lower fold ≥ 17°; seat panel fold ≥ 18
The delivery bed can meet the gynecological clinical examination. The electric control switch is used to control the lifting of the examination bed, the seat plate is folded, and the back plate is folded.
Equipped with a retractable stainless steel dirt basin, imported polyurethane material, antibacterial and anti-fouling, with a waterproof groove to prevent the leakage of amniotic fluid.
The operating table is equipped with a rechargeable battery, and the operating table adopts an imported linear motor. The running speed is uniform and stable, the body position is accurate, and the noise is stable.
SNBASE7300 Operating Tabl
Bed height: 580mm-980mm
Bed width: 540mm
Bed surface arc length: 1300mm
Bed surface rotation angle: 50°
Lifting speed: 50 mm/sec
Power supply: 220V 50Hz
The drive of the examination bed adopts electro-hydraulic transmission mode, which is controlled by the controller by hand, which is convenient and flexible to use. The hydraulic system adopts imported oil pump and solenoid valve. The overall performance is more reliable and durable.
SNMOT7500C operation table
Minimum table height: 600±10mm
Table top height: 890±10mm
Table length: ≥1920±20mm
Table width: ≥920±20mm
Operating table load: ≥250kg
Back panel folding: ≥65°±5° (electric)
Front inclination of the table: ≥5°±2°
Backward tilt: ≥5°±2°
Leg plate bifurcated type: fold up 55°±2°, fold down 5°±2°, detachable
The obstetric bed can meet the needs of a variety of gynecological operations such as gynecological examination, gynecological diagnosis, childbirth, cesarean section and so on. Imported brand mute casters are used, equipped with detachable legs and a hidden dirt basin, which is convenient for doctors and midwives to operate. The product can be equipped with a dual-control system, hand-held controller and foot controller to make the operation of medical staff more convenient.
Detachable armrests, detachable legrests, and a dirt basin under the seat pan. The leg rests on both sides can be moved back and forth, and the combination of the hidden auxiliary table and the flip-up foot support is helpful for the adjustment of the delivery posture of pregnant women and the midwife's delivery work.
| 下一条:Mechanical operating table |
Phone: + 86 17717554373
Email: admin01@chinakej.com
Add: 1-1,No 3 building,NO 618,jianyun road,zhoupu town,pudong new district,shanghai city,China
Phone: + 86 17717554373
Email: admin01@chinakej.com
Add: 1-1,No 3 building,NO 618,jianyun road,zhoupu town,pudong new district,shanghai city,China
+ 86 17717554373
admin01@chinakej.com
1-1,No 3 building,NO 618,jianyun road,zhoupu town,pudong new district,shanghai city,China